C Type Power Press usage process




The usage process of C type power press generally includes the following steps:


Preparation:

Inspect the equipment: Before use, check whether the various components of the electric press are normal, including power supply, switch, cylinder, etc.

Clean the workbench: Make sure there is no debris on the workbench to prevent affecting the safety of operation.


Set the mold:

Install the mold: Fix the required mold on the workbench of the press to ensure that the mold is installed firmly.

Adjust the mold gap: Adjust the gap between the molds according to production requirements to ensure the pressing effect.


Connect the power:

Turn on the power: Connect the power of the electric press and check whether the display and indicator light are normal.


Adjust parameters:

Set pressure and stroke: Set the required pressure and stroke according to the process requirements to ensure that it is suitable for production needs.


Start operation:

Place the workpiece: Place the workpiece to be pressed in the mold to ensure the correct position.

Start the machine: Press the start button, the electric press starts to run, and the pressing process is completed.


Observe and adjust:

Monitor the working process: During the pressing process, observe the running status of the machine to ensure that there are no abnormalities.

Adjust parameters: If you find any problems, adjust the pressure or other parameters in time.


Complete the operation:

Stop the machine: After completing the pressing, press the stop button and turn off the power.

Remove the workpiece: Carefully remove the pressed workpiece and check the product quality.


Cleaning and maintenance:

Clean the equipment: Clean the workbench and mold to keep the equipment clean.

Regular maintenance: According to the use of the equipment, regular maintenance and maintenance are carried out to ensure the normal operation of the equipment.

Follow the above process to use the C type power press safely and efficiently.


Navigation