The high speed precision punch can theoretically work continuously. Under the stability and precision of the mold and feeding system software, the punch can always work normally. Generally, the punch press achieves a thermal cycle after about 2 hours of operation, and its movement position has a stable gap, and it is not easy to cause abnormal phenomena such as biting and calendering. If the high-speed press needs to work continuously, its load needs to be reduced. It is recommended that the load pressure be around 60%.
Statistical analysis of electricity consumption
The motor used in the 100-ton punch is generally a 7.5-kilowatt motor. In theory, if it is applied to the rated current and current, it consumes 7.5 kWh of electromagnetic energy per hour, and the specific cold stamping process of the punch is fully considered. speed, the functional loss should be calculated at a certain discount. It is recommended to calculate at 70%, then the power consumption in 10 hours is 50 kilowatts.